ELECTROMAGNET DRUM SEPARATOR
Maximise Recovery of Ferrous Metals
The Magnapower Electromagnetic Drum Separators are designed for the continuous extraction of iron from material being fed uniformly on to the face of the drum.
The Electro magnetic drums are used in larger scale applications like car shredding and ELV plants.
The Magnapower Electromagnetic Drum Separator is designed for maximum efficiency and a long, trouble free working life, with minimum maintenance requirements. Maganpower will provide a high performance electro magnet designed to suit your application to provide the most effective and efficient method of metal
recovery.
Minimise Maintenance
Wear resistant non-magnetic drum skin.
High permeability iron circuit to minimise stray magnetic fields in shaft
and bearings thus prolonging their life.
Optimise Throughput
Deep field electro magnet systems penetrate through the product burden and remove
the maximum amount of ferrous metal. This allows for a higher throughput of
material to be separated efficiently.
Comprehensive Range
In addition to electro magnets we offer a complete range of Drum Magnets (Non-Deteriorating Rare Earth or
Ferrite Permanent Magnet) to suit your separation
requirements, feed width, product size and throughput.
Magnet Systems
All magnet systems are designed to give maximum separation performance with
either an alternating pole or continuous pole design depending on the
application.
Standard Strength Ferrite Magnets: suitable for separating general tramp
iron and contamination such as nuts, bolts, nails, steel cans, wire etc.
High Intensity Rare Earth Magnets: suitable for removing general tramp iron,
weakly magnetic material, fine iron/wire and ferrous metal with inclusions
such as wood, rubber, non-ferrous metal etc. The Rare Earth Magnet System is
recommended when a maximum level of metal removal is required.
Electro Magnets:
Our high intensity deep field electro magnet systems are typically used in
fragmentiser plants and are ideally suited to material fed to the under side
of the drum magnet. Please contact us for a more detailed specification of
this high performance separator.
Operation
Material is typically fed on to the surface of the drum by vibratory feeder
or chute work. The magnet system holds ferrous metal to its surface allowing
the non-magnetic material to fall away from the drum. Ferrous metal held on
the surface is carried by the revolving drum to a position where the magnet
system ends and it then drops away from the 'cleaned' product.
Typical Applications Include:
- Fragmentiser metal recovery
- Car Shredding
- ELV Metal Recovery Plant
|
